| Sample Mode | Real-Time Sample |
Real-time Sample
Rate | Analogue channel: 2 GSa/s (single-channel), 1 Gsa/s (dual-channel)
Digital channel: 1 GSa/s (8-channel), 500 MSa/s (16-channel) |
| Peak Detect | Analogue channel: 500 ps (single-channel), 1 ns (dual-channel)
Digital channel: 1 ns (8-channel), 2 ns (16-channel) |
| Averaging | After all the channels finish N samples at the same time, N can be 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048,
4096 or 8192. |
| High Resolution | 12 bits of resolution when ≥5 μs/div @ 1 GSa/s (or ≥10 μs/div @ 500 MSa/s). |
Minimum Detectable
Pulse Width | Digital channel: 5 ns |
| Memory Depth | Analogue channel:
Single-channel: Auto, 14 kpts, 140 kpts, 1.4 Mpts, 14 Mpts and 56 Mpts (optional) are available
Dual-channel: Auto, 7 kpts, 70 kpts, 700 kpts, 7 Mpts and 28 Mpts (optional) are available
Digital channel:
14 Mpts (8-channel), 7 Mpts (16-channel) standard; 28 Mpts (8-channel), 14 Mpts (16-channel) optional |
| Input | |
|---|
| Number of Channels | MSO2XX2A/2XX2A-S: 2 analogue channels+16 digital channels
DS2XX2A: 2 analogue channels |
| Input Coupling | DC, AC or GND |
| Input Impedance | Analogue channel: (1 MΩ±1%) || (16 pF±3 pF) or 50 Ω±1.5%
Digital channel: (101 kΩ±1%) || (9 pF±1 pF) |
Probe Attenuation
Coefficient | Analogue channel: 0.01X to 1000X, in 1-2-5 step |
Maximum Input
Voltage (1 MΩ) | Analogue channel: CAT I 300 Vrms, CAT II 100 Vrms, transient overvoltage 1000 Vpk
Digital channel: CAT I 40 Vrms, transient overvoltage 800 Vpk |
| Horizontal | |
|---|
| Time Base Scale | MSO2302A/2302A-S/DS2302A: 1.000 ns/div to 1.000 ks/div
MSO2202A/2202A-S/DS2202A: 2.000 ns/div to 1.000 ks/div
MSO2102A/2102A-S /DS2102A: 5.000 ns/div to 1.000 ks/div |
Channel to Channel
Skew | Skew 1 ns (typical), 2 ns (maximum) |
Maximum Record
Length | 14 Mpts (standard), 56 Mpts (optional) |
| Time Base Accuracy | ≤±25 ppm |
| Time Base Drift | ≤±5 ppm/year |
Maximum Delay
Range | Memory Depth/Sample Rate |
| Time Base Mode | Y-T, X-Y, Roll |
| Number of X-Ys | 1 path |
Waveform Capture
Rate | 52,000 wfms/s (dots display) |
| Vertical | |
|---|
Bandwidth (-3 dB)
(50 Ω) | MSO2302A/2302A-S/DS2302A: DC to 300 MHz
MSO2202A/2202A-S/DS2202A: DC to 200 MHz
MSO2102A/2102A-S/DS2102A: DC to 100 MHz |
Single Bandwidth
(50 Ω) | MSO2302A/2302A-S/DS2302A: DC to 300 MHz
MSO2202A/2202A-S/DS2202A: DC to 200 MHz
MSO2102A/2102A-S/DS2102A: DC to 100 MHz |
| Vertical Resolution | Analogue channel: 8 bit
Digital channel: 1 bit |
| Vertical Scale | When the input impedance is 50 Ω: 500 μV/div to 1 V/div
When the input impedance is 1 MΩ: 500 μV/div to 10 V/div |
| Offset Range | When the input impedance is 50 Ω:
500 μV/div to 50 mV/div: ±2 V
51 mV/div to 200 mV/div: ±10 V
205 mV/div to 1 V/div: ±12 V
When the input impedance is 1 MΩ:
500 μV /div to 50 mV/div: ±2 V
51 mV/div to 200 mV/div: ±10 V
205 mV/div to 2 V/div: ±50 V
2.05 V/div to 10 V/div: ±100 V |
| Bandwidth Limit | MSO2302A/2302A-S/2202A/2202A-S/DS2302A/2202A: 20 MHz/100 MHz
MSO2102A/2102A-S/DS2102A: 20 MHz |
Low Frequency
Response (AC
Coupling, -3 dB) | ≤5 Hz (on BNC) |
| Calculated Rise Time | MSO2302A/2302A-S/DS2302A: 1.2 ns
MSO2202A/2202A-S/DS2202A: 1.8 ns
MSO2102A/2102A-S/DS2102A: 3.5 ns |
| DC Gain Accuracy | ±2% full scale |
| DC Offset Accuracy | ±0.1 div ± 2 mV ± 1% offset value |
Channel to Channel
Isolation | DC to maximum bandwidth: >40 dB |
| Trigger | |
|---|
| Trigger Level Range | Internal: ±5 div from center of the screen
EXT: ±4 V |
| Trigger Mode | Auto, Normal, Single |
| Holdoff Range | 100 ns to 10 s |
High Frequency
Rejection | 75 kHz |
Low Frequency
Rejection | 75 kHz |
| Trigger Sensitivity | 1 div (below 10 mV or noise rejection is enabled)
0.3 div (above 10 mV and noise rejection is disabled) |
| Edge Trigger | |
| Edge Type | Rising, Falling, Rising/Falling |
| Pulse Trigger | |
| Pulse Condition | Positive Pulse Width (greater than, lower than, within specific interval)
Negative Pulse Width (greater than, lower than, within specific interval) |
| Pulse Width Range | 2 ns to 4 s |
| Runt Trigger | |
| Pulse Condition | None, >, <, <> |
| Pulse Polarity | Positive, Negative |
| Pulse Range | 2 ns to 4 s |
| Windows Trigger (Optional) | |
| Windows Type | Rising, Falling, Rising/Falling |
| Trigger Position | Enter, Exit, Time |
| Windows Time | 16 ns to 4 s |
| Nth Edge Trigger (Optional) | |
| Edge Type | Rising, Falling |
| Idle Time | 16 ns to 4 s |
| Number of Edges | 1 to 65535 |
| Slope Trigger | |
| Slope Condition | Positive Slope (greater than, lower than, within specific interval)
Negative Slope (greater than, lower than, within specific interval) |
| Time Setting | 10 ns to 1 s |
| Video Trigger (Optional) | |
| Signal Standard | NTSC, PAL/SECAM, 480P, 576P (standard)
720P, 1080P and 1080I (optional) |
| Pattern Trigger | |
| Pattern Setting | H, L, X, Rising Edge, Falling Edge |
| Delay Trigger (Optional) | |
| Edge Type | Rising, Falling |
| Delay Type | >, <, <>, >< |
| Delay Time | 2 ns to 4 s |
| TimeOut Trigger (Optional) | |
| Edge Type | Rising, Falling, Rising/Falling |
| Timeout Time | 16 ns to 4 s |
| Duration Trigger (Optional) | |
| Pattern Setting | H, L, X |
| Trigger Condition | >, <, <> |
| Duration Time | 2 ns to 4 s |
| Setup/Hold Trigger | |
| Edge Type | Rising, Falling |
| Data Type | H, L |
| Setup Time | 2 ns to 1 s |
| Hold Time | 2 ns to 1 s |
| RS232/UART Trigger | |
| Polarity | Normal, Invert |
| Trigger Condition | Start, Error, Check Error, Data |
| Baud | 2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps, 230400 bps, 460800 bps, 921600
bps, 1 Mbps, User |
| Data Bits | 5 bit, 6 bit, 7 bit, 8 bit |
| I2C Trigger | |
| Trigger Condition | Start, Restart, Stop, Missing ACK, Address, Data, A&D |
| Address Bits | 7 bit, 8 bit, 10 bit |
| Address Range | 0 to 127, 0 to 255, 0 to 1023 |
| Byte Length | 1 to 5 |
| SPI Trigger | |
| Trigger Condition | Timeout |
| Timeout Value | 100 ns to 1 s |
| Data Bits | 4 bit to 32 bit |
| Data Setting | H, L, X |
| CAN Trigger (Optional) | |
| Signal Type | Rx, Tx, CAN_H, CAN_L, Differential |
| Trigger Condition | SOF, EOF, Frame Type, Frame Error |
| Baud | 10 kbps, 20 kbps, 33.3 kbps, 50 kbps, 62.5 kbps, 83.3 kbps, 100 kbps, 125 kbps, 250 kbps, 500 kbps, 800 kbps, 1
Mbps, User |
| Sample Point | 5% to 95% |
| Frame Type | Data, Remote, Error, Over Load |
| Error Type | Bit Fill, Answer Error, Check Error, Format Error, Random Error |
| USB Trigger (Optional) | |
| Signal Speed | Low Speed, Full Speed |
| Trigger Condition | SOP, EOP, RC, Suspend, Exit Suspend |
| General Specification | |
|---|
| Output Voltage | About 3 V, peak-peak |
| Power Voltage | 100 V to 240 V, 45 Hz to 440 Hz |
| Power | Maximum 50 W |
| Fuse | 2 A, T degree, 250 V |
| Frequency | 1kHz |
| Temperature Range | Operating: 0℃ to +50℃
Non-operating: -40℃ to +70℃ |
| Cooling Method | Fan cooling |
| Humidity Range | 0℃ to +30℃ : ≤95% relative humidity
+30℃ to +40℃ : ≤ 75% relative humidity
+40℃ to +50℃ : ≤45% relative humidity |
| Altitude | Operating: under 3,000 meters
Non-operating: under 15,000 meters |
| Size | Width×Height×Depth = 361.6 mm×179.6 mm×130.8 mm |
| Weight | Package Excluded 3.9 kg±0.5 kg
Package Included 4.5 kg±0.5 kg |
Gord R –
Rigol 100 Mhz oscilloscope .
Unit delivered at exactly the right time , as requested , undamaged and all parts included .
operating manual is a little dissapointing , but I’ve not got into it in depth as yet ,… would like to increase the size of figures on screen …. but ,
a very nice peice of equipment
Chris C –
DS2102A is excellent value for ££s
Thanks RIGOL-uk once again for your help… Not many companies are offering this level of service. I’m very happy with both the DS2102 and the DSA 815. Not only are they remarkable value for money, they are excellent pieces of test equipment, both in terms of specification and in ease of use.
Best Regards
Chris