Rigol DS1074Z-S Plus 70MHz Digital Oscilloscope & Signal Generator – MSO Ready

£495.00 (£594.00 inc VAT)

4 in stock (can be backordered)

Availability: Stock models delivered next working day (UK only) for orders placed before 16:30 (Mon - Fri)

Free Shipping Price Match Guarantee
SKU: DS1074Z-S-Plus Category:

Description


NOW EVEN BETTER VALUE – GET ALL SOFTWARE OPTIONS FOR FREE!
Buy a new Rigol DS1000Z series oscilloscope and get ALL software options …
(Deeper Memory, Record & Replay, Advanced Trigger Functions and Serial-Bus Analysis) … for FREE!

Rigol DS1074Z-S Plus Digital Oscilloscope

The Rigol DS1074Z-S Plus 1GSa/s, 70MHz, 4-channel Digital Oscilloscopes offers the flexibility of a future upgrade to a mixed signal oscilloscope (16 digital channels), simply by ordering the RPL1116. Available in 70MHz and 100MHz versions, The DS1000Z series of digital oscilloscopes use the Ultravision technology platform, which continues the characteristics of deep storage and high waveform capture rate, and has an excellent cost performance advantage.

Features:

  • MSO Ready – Can be upgraded to 16 digital channels
  • 70MHz bandwidth, 4 channels with built-in 2 channel function / arbitrary waveform generator
  • Maximum sample rate 1GSa/s
  • Vertical scale 1mV/div to 10V/div
  • Standard memory depth now 24Mpts (was 12Mpts)
  • Innovative “UltraVision” technology
  • Up to 30,000wfms/s waveform capture rate
  • Up to 60,000 frames real-time waveform record and replay (optional)
  • 7″ WVGA (800×480) TFT LCD display, 64 intensity grading levels
  • Up to 15-off trigger functions, including various protocol triggers
  • Auto measurement of 33 waveform parameters, with statistics
  • Built-in FFT with a choice of window functions
  • Pass/fail test function
  • Built-in help facility
  • Connectivity: USB Host & Device, LAN(LXI), AUX Output, (USB-GPIB, optional)
  • Compact size, light weight, easy to use
  • Supplied with… 4-off passive probes (150MHz), 2-off BNC leads, USB cable, UK & European mains leads, quick guide
  • Standard on all units sold after 2017… Deeper memory, waveform record & replay, advanced trigger functions & serial-bus analysis
  • Options include… Soft carry bag, high-voltage probes, current probes, differential probes, rack mount kit, Telonic Standard Calibration, RCL 17025 Calibration

Documentation

Sample
Sample ModeReal-Time Sample Rate
Real-Time Sample RateAnalogue channel:
1 GSa/s (single-channel),
500 MSa/s (dual-channel), 250 MSa/s (three/four-channel)
Digital channel:
1 GSa/s (8-channel), 500 MSa/s (16-channel)
Peak DetectAnalogue channel: 4 ns
Digital channel: 4 ns
AveragingAfter all the channels finish N samples at the same time, N can be 2, 4, 8, 16, 32, 64, 128, 256, 512 or 1024.
High Resolution12 bit (max.)
InterpolationSin(x)/x (optional)
Minimum Detect Pulse WidthDigital channel: 10 ns
Memory DepthAnalogue channel:
24 Mpts (single-channel), 12 Mpts (dual-channel), 6 Mpts (three/four-channel)
Digital channel:
24 Mpts (8-channel), 12 Mpts (16-channel)
Input
Number of ChannelsDS1XX4Z Plus/1XX4Z-S Plus: 4 analogue channels, 16 digital channels available after upgrade
DS1054Z: 4 analogue channels
Input CouplingDC, AC or GND
Input ImpedanceAnalogue channel: (1 MΩ±1%) || (15 pF±3 pF)
Digital channel: (100 kΩ±1%) || 8 pF±3 pF)
Probe Attenuation CoefficientAnalogue channel: 0.01X to 1000X, in 1-2-5 step
Maximum Input Voltage (1MΩ)Analogue channel:
CAT I 300 Vrms, CAT II 100 Vrms, transient overvoltage 1000 Vpk
Digital channel:
CAT I 40 Vrms, transient overvoltage 800 Vpk
Horizontal
Timebase Scale5 ns/div to 50 s/div
Maximum Record Length24 Mpts
Timebase Accuracy≤ ± 25 ppm
Clock Drift≤ ± 5 ppm/year
Maximum Delay RangeNegative delay: 1/2 (Memory Depth/Sample Rate)
Positive delay: 1 s to 500 s
Timebase ModeYT, XY, Roll
Number of X-Y’s1
Waveform Capture Rate30,000 wfms/s (dots display)
Zero Offset±0.5div*minimum time base scale
Vertical
Bandwidth (-3dB)DS1104Z Plus/1104Z-S Plus: DC to 100 MHz
DS1074Z Plus/1074Z-S Plus: DC to 70 MHz
DS1054Z: DC to 50 MHz
Single-shot BandwidthDS1104Z Plus/1104Z-S Plus: DC to 100 MHz
DS1074Z Plus/1074Z-S Plus: DC to 70 MHz
DS1054Z: DC to 50 MHz
Vertical ResolutionAnalogue channel: 8 bits
Digital channel: 1 bit
Vertical Scale
(Probe ratio is 1X)
1 mV/div to 10 V/div
Offset Range
(Probe ratio is 1X)
1 mV/div to 499 mV/div: ± 2 V
500 mV/div to 10 V/div: ± 100 V
Bandwidth Limit20 MHz
Low Frequency Response
(AC coupling, -3dB)
≤5 Hz (on BNC)
Calculated Rise TimeDS1104Z Plus/1104Z-S Plus: 3.5 ns
DS1074Z Plus/1074Z-S Plus: 5 ns
DS1054Z: 7 ns
DC Gain Accuracy<10 mV: ±4% full scale
≥10 mV: ±3% full scale
DC Offset Accuracy±0.1 div ± 2 mV ± 1% offset
Channel to Channel IsolationDC to maximum bandwidth: >40 dB
Trigger
Trigger Level Range±5 div from the centre of the screen
Trigger ModeAuto, Normal, Single
Holdoff Range16 ns to 10 s
High Frequency Rejection75 kHz
Low Frequency Rejection75 kHz
Trigger Sensitivity1.0 div (below 5 mV or noise rejection is enabled)
0.3 div (above 5 mV and noise rejection is disabled)
Edge TypeRising, Falling, Rising/Falling
Pulse ConditionPositive Pulse Width (greater than, lower than, within specified interval)
Negative Pulse Width (greater than, lower than, within specified interval)
Pulse Width8 ns to 10 s
Pulse Width ConditionNone, >, <, <>
PolarityPositive, Negative
Pulse Width Range8 ns to 10 s
Windows TypeRising, Falling, Rising/Falling
Trigger PositionEnter, Exit, Time
Windows Time8 ns to 10 s
Edge TypeRising, Falling
Idle Time16 ns to 10 s
Edge Number1 to 65535
Slope ConditionPositive Slope (greater than, lower than, within specified interval)
Negative Slope (greater than, lower than, within specified interval)
Time Setting8 ns to 10 s
Signal StandardNTSC, PAL/SECAM, 480P, 576P
Pattern SettingH, L, X, Rising, Falling
Edge TypeRising, Falling
Delay Type>, <, <>, ><
Delay Time8 ns to 10 s
Edge TypeRising, Falling, Rising/Falling
TimeOut Value16 ns to 10 s
PatternH, L, X
Trigger Condition>, <, <>
Duration Time8 ns to 10 s
Edge TypeRising, Falling
Data PatternH, L
Setup Time8 ns to 1 s
Hold Time8 ns to 1 s
PolarityNormal, Invert
Trigger ConditionStart, Error, Check Error, Data
Baud Rate2400 bps, 4800 bps, 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps, 230400 bps, 460800 bps,
921600 bps, 1 Mbps and User
Data Bits5 bits, 6 bits, 7 bits, 8 bits
Trigger ConditionStart, Restart, Stop, Missing Ack, Address, Data, A&D
Address Bits7 bits, 8 bits, 10 bits
Address Range0 to 127, 0 to 255, 0 to 1023
Byte Length1 to 5
Trigger ConditionTimeout, CS
Timeout Value16 ns to 10 s
Data Bits4 bit to 32 bit
Data Line SettingH, L, X
Measure
CursorManual mode:
Voltage deviation between cursors ( △V )
Time deviation between cursors ( △T )
Reciprocal of △T (Hz) (1/ △T )
Track mode:
Voltage and time values of the waveform point
Auto mode:
Allow to display cursors during auto measurement
Auto MeasurementAnalogue channel:
Period, Frequency, Rise Time, Fall Time, Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle,
Negative Duty Cycle, tVmax, tVmin, Positive Rate, Negative Rate, Delay 1→2 , Delay 1→2 , Phase
1→2 , Phase 1→2 , Maximum, Minimum, Peak-Peak Value, Top Value, Bottom Value, Amplitude, Upper
Value, Middle Value, Lower Value, Average, Vrms, Overshoot, Pre-shoot, Area, Period Area, Period Vrms,
Variance
Digital channel:
Period, Frequency, Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty Cycle,
Delay 1→2 , Delay 1→2 , Phase 1→2 , Phase 1→2
Number of MeasurementsDisplay 5 measurements at the same time
Measurement RangeScreen or cursor
Measurement StatisticAverage, Max, Min, Standard Deviation, Number of Measurements
CounterHardware 6 bits counter (channels are selectable)
Display
Display Type7.0 inch TFT LCD display
Display Resolution800 horizontal × RGB × 480 vertical pixel
Display Colour16 million color (24 bit true color)
Persistence TimeMin, 100 ms, 200 ms, 500 ms, 1 s, 5 s, 10 s, Infinite
Display TypeDots, Vectors
I/O
Standard PortsUSB Host, USB Device, LAN, AUX Output (TrigOut/PassFail)
General Specifications
Output VoltageAbout 3 V, peak-peak
Frequency1 kHz
Power Voltage100 V to 240 V, 45 Hz to 440 Hz
PowerMaximum 50 W
Fuse2 A, T degree, 250 V
Temperature RangeOperating: 0℃ to +50℃
Non-operating: -40℃ to +70℃
Cooling MethodFan cooling
Humidity Range0℃ to +30℃ : ≤95℃ relative humidity,
+30℃ to +40℃ : ≤75℃ relative humidity,
+40℃ to +50℃ : ≤45℃ relative humidity
AltitudeOperating: under 3,000 meters,
Non-operating: under 15,000 meters
DimensionsWidth × Height × Depth = 313.1 mm × 160.8 mm × 122.4 mm
WeightWithout package 3.2 kg ± 0.2 kg,
With package 3.8 kg ± 0.5 kg
Calibration IntervalThe recommended calibration interval is 18 months.

Note*

Specifications are liable to change. For the full list of Specifications, please see the products datasheet located under the ‘Documentation’ tab.

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

You may also like…

Optional Accessories …